Universal white starting putty, which is used in construction and renovation work to level joints between panels, walls and panels, cracks, openings, when processing slopes.It is successfully used for leveling walls, ceilings, and also as a plastering mortar. Thanks to special admixtures, the solution is highly plastic, has high adhesion to almost any surface, does not form cracks, and contains fibers.
The surface shall be level, dry and strong, free from dust, dirt, lime, grease or paint. The detachable nongranular layers need to be removed. All the bases are treated 1-2 times with SCANMIX primer.
To obtain the solution, 0.16-0.2 l/kg of dry product should be mixed and the mixture must be deposited in water. The water must be clean, with a temperature of about 20°C. The required thickness is achieved by mechanical mixing. If the solution is very thick or liquid, water or mixtures shall be added. Leave the solution for 5 minutes, thoroughly stir again. The solution shall be applied to the surface prepared with a stainless steel or plastic spatula. The thickness of one layer shall not exceed 20 mm. Thickness of one layer not exceeding 20 mm. Not more than 3 layers shall be applied.
The manufacturer shall not be liable for improper use of the material or its use for purposes and conditions not provided for in the instruction.
The solution and water should not be poured out after working in sewer pipes. It is desirable to work in rubber gloves. Contact with the skin or eyes shall be avoided. If the solution enters the skin or eyes, it is necessary to wash it thoroughly with water, since the mixture contains cement which, when mixed with water, forms an alkaline medium.
In dry space and on pallets, in factory packaging: 12 months from the date of issue indicated on the package.
The dry mixture is packed in paper bags of 25 kg.
| COMPOSITION: Mixture of white or grey cement with mineral fillers and special additives | |
| Color | gray, white |
| Maximal grain | 0,3 mm |
| Amount of water to mix solution | 0,16-0,2 l\kg mixture |
| Final solution time | at least 4 hours |
| Air temperature and bases when used | +5°С to +30°С |
| Strength of adhesion to base | more than 0,8 megapascal |
| Layer thickness | up to 20 mm |
| Surface finish | after 48 hours |
| Flow (depending on the thickness of the layer applied) | 2 to 3 kg/m2/mm |
