Power Protect 314

arrow_hist Paints arrow_hist Facade paints
Power Protect 314

Universal paint for facade and interior work. New generation paint with increased ...

Read More
Scanmix FACADE NORMAL

Acrylic paint for indoor and outdoor use. Designed for painting building facades, ...

Read More
Scanmix FACADE STANDART

Weatherproof acrylic paint for indoor and outdoor use. Designed for painting building ...

Read More
Scanmix FACADE DELUXE

Weatherproof acrylic facade paint for interior and exterior use. Forms a durable coating. ...

Read More
Scanmix ACRYL FACADE DELUXE B3

Acrylic facade paint for toning on tinted equipment in saturated bright shades according ...

Read More
Scanmix SILICONE FACADE Standart

Silicone facade paint with high water resistance and vapor permeability. Provides ...

Read More

■ Water-soluble, environmentally friendly, with low odour

■ Atmosphere-resistant

■ High adhesion

■ Is not yellow

■ Thin-layer

■ Soap-resistant

■ Easily applied

PURPOSE:

Universal paint for facade and interior work. New generation paint with increased adhesion, weather-resistant and vapor-permeable. Provides excellent long-term performance, makes the surface dust-repellent and hydrophobic. It is intended for painting in places with aggressive environmental influences, for wear-resistant indoor coatings with high surface loads. Has a high hiding power. Suitable for painting cement and gypsum substrates, sand-lime and ceramic bricks, concrete, facade insulation systems, fiber-cement boards, galvanized substrates, Fibreboard, Bedrock, QSB and OSB, wood.

Thin layer. Accentuates the texture of coatings. Washes well with water and is resistant to disinfectants.

PREPARATION OF THE BASE:

The preparation of the ground is carried out in accordance with State Building Norms of Ukraine V.2.6-22-2001 and National standards of Ukraine-N B А.3.1-23. The surface must be clean, dry and workable. Carefully remove residues of lime whitewash, efflorescence and other contamination. Fresh cement plaster should be cured for at least 28 days, concrete – at least 3 months, surfaces of thermal insulation systems – at least 7 days, surfaces filled with cement putty – at least 3 days. The humidity of the base shall not exceed 4 per cent. The surface is desensitized, TM SCANMIX is treated with primer TM SCANMIX, affected by fungi sites cleanse with antiseptic solution.

APPLICATION METHOD:

The paint is ready for use. Thoroughly mix before use.

Dilute the paint with water up to 5%. Do not dilute the paint at the end.

PERFORMANCE OF WORK:

Work should be carried out at a base and ambient temperature from + 5 ° C to + 30 ° C and a relative humidity of no more than 65%. Apply the next layer after 2-4 hours depending on drying. Drying of paint 8-10 hours at a substrate temperature of + 20 ° C and a relative humidity of 60%.Under other conditions, the drying period may change. Full strength and ability to withstand mechanical forces are achieved after 7 days.

Do not apply paint on surfaces exposed to direct sunlight, strong wind, precipitation. Protect painted surfaces from precipitation until the paint is completely dry, but not less than a day.

TONIC:

The paint can be toned using Color Mix machines,

To prevent possible deviations in shades, it is recommended to check the material for accuracy in accordance with the required shade before use. On substrates that are in the same plane, use the material of only one production batch (see on the package).

Limited coverage is inherent in bright, intense shades. Therefore, with such shades, it is recommended to pre-apply the coating in a white base, tinted in the closest to the finishing pastel shade. A second coat may be required.

DEGREE OF GLOSS: Silky Matt.

SAFETY AND RECYCLING MEASURES:

Store in a place not accessible to children. Do not put paint in the eyes or skin. Residues of dried paint are environmentally friendly and disposed of as normal building debris.

STORAGE:In a tightly closed container in a cool and cold-proof place.

WARRANTY PERIOD OF STORAGE: 36 month. The date and batch of manufacture look at the package.

CONSUMPTION: 120-140 ml / m². The exact flow rate is determined by trial application.

WEIGHT: 14 kg, 7 kg.