The surface shall be level, dry and strong, free from dust, dirt, lime, grease or paint. The detachable nongranular layers need to be removed. All the bases are treated 1-2 times with SCANMIX primer.
PERFORMANCE OF WORK:
To obtain the solution, 0.16-0.2 l/kg of dry product should be mixed, the mixture being deposited in water. The water must be clean, with a temperature of about 20°C. The required thickness is achieved by mechanical mixing. If the solution is very thick or liquid, water or mixtures shall be added.Leave the solution for 5 minutes, thoroughly stir again. The solution shall be applied to the surface prepared with a stainless steel or plastic spatula. The thickness of one layer shall not exceed 20 mm. No more than three layers are applied.
The manufacturer shall not be liable for improper use of the material or its use for purposes and conditions not provided for in the instruction.
SAFETY PRACTICES:
Do not pour mortar and water into sewer pipes after work. It is advisable to wear rubber gloves. Avoid contact of the solution with the skin or eyes. If the solution enters the skin or eyes, it is necessary to wash it thoroughly with water, since the mixture contains cement which, when mixed with water, forms an alkaline medium.
SHELF LIFE:
In dry space and on pallets, in factory packaging: 12 months from the date of issue indicated on the package.
PACKAGE:
The dry mixture is packed in paper bags of 25 kg.
TECHNICAL CHARACTERISTICS:
COMPOSITION: Mixture of white or grey cement with mineral fillers and special additives
Color
gray, white
Maximal grain
0,3 mm
Amount of water to mix solution
0,16-0,2 l/kg mixture
Final solution time
at least 4 hours
Air temperature and bases when used
from +5°C to +30°C
Strength of adhesion to base
more than 0,8 megapascal
Layer thickness
up to 20 mm
Surface finish
after 48 hours
Flow (depending on the thickness of the layer applied)