Scanmix SILICONE FACADE Standart

arrow_hist Paints
Scanmix SILICONE FACADE Standart

Silicone facade paint with high water resistance and vapor permeability. Provides ...

Read More
Scanmix SILICONE FACADE DELUXE

Silicone facade paint with increased weather resistance and vapor permeability. Provides ...

Read More
Scanmix GOLDDISPERSION

Deep penetration primer is used to strengthen the top layer of various bases, to reduce ...

Read More
Scanmix STANDART DISPERSION

The primer is used to strengthen the upper layer of various bases, reduce water ...

Read More
Scanmix PRIMER-CONCENTRATE 1:4

Deep penetration primer concentrate. Designed for the preparation of the base, for ...

Read More
Scanmix PRIMER-CONCENTRATE 1:6

Deep penetration primer concentrate. Designed for the preparation of the base, for ...

Read More

PREPARATION OF THE BASE:

The preparation of the ground is carried out in accordance with State Building Norms of Ukraine V.2.6-22-2001 and National standards of Ukraine-N B А.3.1-23. The surface must be clean, dry and workable. Carefully remove residues of lime whitewash, efflorescence and other contamination. Fresh cement plaster must be cured for at least 28 days, concrete for at least 3 months, surfaces of thermal insulation systems for at least 7 days, surfaces filled with cement putty for at least 3 days. The moisture content of the base should not exceed 4%. Dust the surfaces, treat with TM SCANMIX primer, clean the areas affected by fungi with an antiseptic solution.

APPLICATION METHOD:

The paint is ready to use. Stir well before use. Apply in two coats with a brush, roller or spray. Dilute the paint with water no more than 5%. Do not thin the paint in the final coat.

PERFORMANCE OF WORK:

Work should be carried out at a temperature of the base and ambient air from + 5 ° C to + 30 ° C and a relative humidity of not more than 65%. Apply the next layer after 2-4 hours depending on drying. Drying of paint 8-10 hours at a substrate temperature of + 20 ° C and a relative humidity of 60%. Drying times may vary under other conditions.

Full strength and ability to withstand mechanical stress occurs after 7 days.
Do not apply paint to surfaces exposed to direct sunlight, strong wind, precipitation. Protect painted surfaces from precipitation until the paint is completely dry, but not less than a day.

TONNAGE: The paint can be toned on machine equipment on the system Color Mix, SELECT.

Also in the systems of other manufacturers.

STORAGE: In a tightly closed container in a cool and cold-proof place.

WARRANTY PERIOD OF STORAGE: 24 months. Please check the packaging for the date and batch of manufacture.

CONSUMPTION: 210 gr -240 gr per 1 m2.

PACKAGE: 7 kg, 14 kg.