Scanmix ACRYL FACADE DELUXE B3

arrow_hist Paints arrow_hist Facade paints arrow_hist Scanmix ACRYL FACADE DELUXE B3
Scanmix ACRYL FACADE DELUXE B3

Acrylic facade paint for toning on tinted equipment in saturated bright shades according to the Color Mix system according to the MD COLOR, RAL, NCS and others palette. Used only in tinted form! Designed for painting facades, as well as creating wear-resistant coatings indoors. Forms a water-repellent, moisture-resistant, elastic and durable coating. Resistant to wet abrasion. It is used for painting cement plaster, concrete, brick, surfaces of thermal insulation systems of facades, as well as drywall, fibreboard, chipboard, QSB and OSB, plywood, wood and indoor wallpaper. Compatible with pigments from most European manufacturers. Does not contain solvents. Vapor permeable.

Material consumption calculator

Enter the surface area, m²

You will need approximately 0kg

PREPARATION OF THE BASE:

The preparation of the ground is carried out in accordance withState Building Norms of Ukraine V.2.6-22-2001 and National standards of Ukraine-N B А.3.1-23. The surface must be clean, dry and workable. Carefully remove residues of lime whitewash, efflorescence and other contamination. Fresh cement plaster must be cured for at least 28 days, concrete for at least 3 months, surfaces of thermal insulation systems for at least 7 days, surfaces filled with cement putty for at least 3 days. The moisture content of the base should not exceed 4%. Dust the surfaces, treat with TM SCANMIX primer, clean the areas affected by fungi with an antiseptic solution.

APPLICATION METHOD:

The paint is ready to use. Stir well before use. Apply in two coats with a brush, roller or spray. Dilute the paint with water no more than 5%. Do not thin the paint in the final coat. Coating of surfaces in one plane should be carried out using the “wet on wet” method, without interruption in work. Prime contrasting, dark surfaces, as well as surfaces that have a different shade with TM Scanmix Facade DeLuxe paint diluted with 5% water.

PERFORMANCE OF WORK:

The work should be carried out at a temperature of the base and ambient air from + 5 ° C to + 30 ° C and a relative humidity of not more than 65%. Apply the next layer after 3-4 hours depending on drying. Drying of the paint 12 hours at a substrate temperature of + 20 ° C and a relative humidity of 60%. Drying times may vary under other conditions. Full strength and ability to withstand mechanical stress occurs after 7 days. Do not apply paint to surfaces exposed to direct sunlight, strong wind, precipitation. Protect painted surfaces from precipitation until the paint is completely dry, but not less than a day.

COLOR: Transparent.

TONNAGE: The paint can be toned on machine equipment on the system Color Mix, SELECT.

Also in the systems of other manufacturers.

STORAGE: In a tightly closed container in a cool and cold-proof place.

WARRANTY PERIOD OF STORAGE: 36 months. Please see the date and batch of manufacture on the packaging.

CONSUMPTION: 220 gr -250 gr per 1 m²

PACKAGE: 7 kg, 14 kg.