Scanmix FACADE NORMAL

arrow_hist Paints arrow_hist Facade paints arrow_hist Scanmix FACADE NORMAL
Scanmix FACADE NORMAL

Acrylic paint for indoor and outdoor use. Designed for painting building facades, creating wear-resistant and moisture-resistant coatings. Has good adhesion and high hiding power. Suitable for cement and gypsum substrates, sand-lime and ceramic bricks, concrete, facade insulation systems, fibreboards, chipboards, QSB and OSB, wood and indoor wallpaper. Resistant to weathering. Vapor permeable.

Material consumption calculator

Enter the surface area, m²

You will need approximately 0kg

PREPARATION OF THE BASE:

The preparation of the base is carried out in accordance with State Building Norms of Ukraine V.2.6-22-2001 and National standards of Ukraine-N B А.3.1-23. The surface must be clean, dry and workable. Carefully remove residues of lime whitewash, efflorescence and other contamination. Fresh cement plaster should be cured for at least 28 days, concrete – at least 3 months, surfaces of thermal insulation systems – at least 7 days, surfaces putty with cement putty – at least 3 days. The moisture content of the base should not exceed 4%. Dust the surfaces, treat with TM SCANMIX primer, clean the areas affected by fungi with an antiseptic solution.

APPLICATION METHOD:

The paint is ready to use. Stir well before use. Apply in two coats with a brush, roller or spray. Dilute the paint with water no more than 5%. Do not thin the paint when finishing.

PERFORMANCE OF WORK:

Work should be carried out at a temperature of the base and ambient air from + 5 ° C to + 30 ° C and a relative humidity of not more than 65%. Apply the next layer after 2-4 hours depending on drying. Drying of paint 8-10 hours at a substrate temperature of + 20 ° C and a relative humidity of 60%. Drying times may vary under other conditions. Full strength and ability to withstand mechanical stress occurs after 7 days. Do not apply paint to surfaces exposed to direct sunlight, strong wind, precipitation. Protect painted surfaces from precipitation until the paint is completely dry, but not less than a day.

DEGREE OF GLOSS: Matt.

COLOUR: White.

TINTING: The paint can be tinted on machine equipment according to the Color Mix system, and a pigment dye.

STORAGE: In a tightly closed container in a cool and frost-protected place.

GUARANTEED STORAGE LIFE: 36 months. See the date and batch of production on the package.

CONSUMPTION: 220 gr -250 gr per 1 m2

PACKAGING: 7 kg, 14 kg.