Scanmix QUARZGRUND STANDART

arrow_hist Paints arrow_hist Primers arrow_hist Scanmix QUARZGRUND STANDART
Scanmix QUARZGRUND STANDART

Ready-to-use primer paint with quartz filler. Designed for preliminary surface preparation for decorative plasters and paints. Suitable for application on concrete, plastered surfaces, cement-lime, plasterboard, as well as on surfaces that have been painted with water-based paints. It is used for indoor and outdoor use. The primer paint has high adhesion. It is used for thermal insulation systems especially for the quality of the primary coating when applying plasters based on synthetic resins, dispersion silicate materials and mineral plasters with colored stones. Allows walls to “breathe”, release steam and moisture.

Material consumption calculator

Enter the surface area, m²

You will need approximately 0L

PROPERTIES:

  • Ready for use
  • Water-soluble
  • Environmentally sound
  • Improves adhesion
  • High steadiness
  • Steam-permeable
  • Dry fast

METHOD OF USE:

Stir well before application. The substrate must be clean, dry and capable of bearing the load. Apply at a surface temperature of + 5 ° C to + 30 ° C. Do not apply to heated substrates. Avoid direct exposure to direct sunlight, strong winds and humidity over 65%. Apply with roller or brush. Rinse the tool with water after use.

DRYING TIME: Depends on temperature. At a temperature of +20 and a relative humidity of 65% from 1 – 2 hours. Subsequent application of plaster after 10-12 hours (paint-primer must be resistant to scratches).

DEGREE OF SHINE: Half-complete.

CAPACITY: 3 l, 5 l, 10 l.

COLOR: Whire.

TONED: Toned by COLOR MIX.

CONSUMPTION: 185-260 ml /m², or 4-6 m/l. Density 1,35 kg/l.

STORAGE: In tightly closed packagings at a temperature not less than +5°C and not exceeding 30°C.

GUARANTEE PERIOD: 24 months from date of manufacture.

COMPOSITION: Quartz filler, dispersion, impurities.