Scanmix SILICONE Structur-Farbe

arrow_hist Paints arrow_hist Facade paints arrow_hist Scanmix SILICONE Structur-Farbe
Scanmix SILICONE Structur-Farbe

Structural facade paint with the addition of silicone. Designed to create decorative textured coatings on facades and indoors. Possesses high vapor permeability and weather resistance. It can be used in thermal insulation systems for facades based on mineral wool. Does not require prior priming with adhesive primers. Designed for application on cement and concrete surfaces, surfaces of facade thermal insulation systems, including those using mineral wool, aerated concrete, foam concrete, brick, painted surfaces, as well as on gypsum bases, gypsum board, fiberboard, chipboard, QSB and OSB, plywood and wood indoors.

Material consumption calculator

Enter the surface area, m²

You will need approximately 0kg

PROPERTIES:

  • atmosphere-resistant
  • hydrophobic
  • forms decorative textures
  • hides surface defects
  • compatible with mineral wool

COLOUR: White (matte)

BASE: Preparation of the base isNational standards of Ukraine-N B В.2.6-212: 2016 and National standards of Ukraine-N B А.3.1-23. The surface must be clean, dry and sound. Carefully remove fragile, old coatings and grease stains. All cementitious plasters must be cured for more than 28 days. Pre-treat surfaces with SCANMIX TM primer. Clean and treat areas affected by the fungus with an antiseptic primer.

PERFORMANCE OF WORK: Stir well before use. Apply with a brush, trowel or roller. When applying the first coat, dilute with water up to a maximum of 10%. Do not thin the last layer. Apply in small sections with a roller or trowel, rolling in one direction. The coating can be embossed with structured rollers, trowel or brush. Work should be carried out at a base temperature of + 5 ° C to + 30 ° C and a relative air humidity below 80%. Do not apply to the surface under the influence of direct sunlight, strong wind, precipitation.

CONSUMPTION: For covering aerated concrete in one layer: 0.7-0.9 kg / m², as a primer – about 0.3 kg / m². The exact consumption is determined by trial application on site. Apply the next layer after 24 hours. Complete drying – 3 days at a temperature of + 20 ° C and a humidity of 65%, in other conditions the drying time may change. Repainting is possible after 24 hours.

TONNAGE: To be machined by Color Mix

WEIGHT: 15 kg, 25 kg.

STORAGE: In a tightly closed container in a cool place at temperatures from + 5 ° C to + 35 ° C. Avoid direct sunlight on the container. The guaranteed shelf life in hermetically sealed original packaging is 24 months. See the production date and batch number on the package.