Scanplast M 35
Polystyrene board, EPS80, thickness: 15.1-17.0 kg / m³.
Polystyrene board, EPS80, thickness: 15.1-17.0 kg / m³.
– insulation of external walls for decorative plaster;
– insulation of ceilings and roofs from the inside;
– floors in residential buildings for private use;
– heated floors;
– sockets, for decorative plaster;
– walls below ground level with waterproofing under normal loads;
– floors on the ground with a cement-sand screed under normal loads;
– terraces, balconies, garages and entrances.
Parameters | М 35 |
Compressive strength at 10% deformation, megapascal | 0,12 |
Limit of bending strength not less than megapascal | 0,21 |
Thermal conductivity in dry state t=25ºС | 0,036 |
Moisture resistance of stoves, no more than, % | 12 |
Water absorption in 24 hours by volume, no more than, % | 2 |
Marking on -25 National standards of Ukraine B V. 2.7-8-94 |
styrofoam
ПСБ-С-15 |