Scanplast М 25 STANDART

Additional materials for thermal insulation

Expanded polystyrene board, EPS60, density: 11.0-13.0 kg / m³.

Scanplast М 25 FASAD

Expanded polystyrene board, EPS40, density: 10.0-10.9 kg / m³.

Scanplast M 25 NORMAL

Expanded polystyrene board, EPS30, density: 9.0-9.9 kg / m³.

Scanplast M 25 LIGHT

Expanded polystyrene board, EPS20, density: 7.5-7.9 kg / m³.

Scanplast M 25 UNIVERSAL

Expanded polystyrene board, EPS25, density: 8.0-8.9 kg / m³.

Scanplast ПСБ-С-15

Expanded polystyrene board, EPS15, density: up to 7.5 kg / m³.

« 1 2

SCOPE OF USE:

– insulation of external walls for decorative plaster;
– filling the walls of a frame house;
– embedding in brickwork;
– prevention of cold bridges in eaves, door frames, lintels and other places;
– the outer layer of the walls of the frame house for the “ventilation facade” system;
– for leveling walls for plaster;
– insulation of ceilings and roofs from the inside;
– the space between and under the rafters in sloped roofs.

Parameters	М 25 STANDART
Compressive strength at 10% deformation, megapascal	0,09
Limit of bending strength not less than megapascal	0,17
Thermal conductivity in dry state t=25ºС	0,037
Влагостойкость плит, не больше, %	12
Water absorption in 24 hours by volume, no more than, %	2,5
Marking on -25 National standards of Ukraine B V. 2.7-8-94	styrofoam ПСБ-С-15